company news about Which spraying equipment is more energy efficient?

Choose more energy efficient spraying equipment from those aspects:
Air spraying equipment: It works by compressed gas as atomization power, which is a more traditional and simple spraying method. This kind of equipment can adjust the spray width at will, easy to operate, is the best of many spraying methods. The only certainty of this equipment is that the paint utilization rate is low, the effective utilization rate is only about 30%, and the wave spray often causes the shortcomings of rebound or excessive spraying.
High-pressure airless spraying equipment: This is a high-pressure spraying method, the spraying efficiency of the work can reach more than 300m2/h, which can greatly save manpower and production time. This equipment saves paint, especially for the annual higher paint, but it has higher working conditions and must work under 220V alternating current. Moreover, the paint output of airless spraying equipment is also large when working, and the atomized particles are coarse, the coating thickness is not easy to control, and the fine spraying is not as fine as the air spraying. Air-assisted airless spraying equipment: air-assisted airless spraying, also known as mixed spraying, is a spray spraying method that is atomized with a small amount of compressed air impacting a fluid at a certain speed. This spraying method has the characteristics of fast spraying speed and good spraying quality, and its coating transfer efficiency is about 60-80%, which is a new spraying method with a wide range of applications, ideal and worth promoting.
High efficiency and low pressure spraying equipment: This spraying equipment uses a high efficiency and low pressure spraying method, and the transfer efficiency of the coating can reach more than 65%. But its paint yield is low, the production efficiency is not high.
Electrostatic spraying equipment: This is a device that can be mixed with air spraying, and the advantage is that it is not affected by environmental factors. It is more suitable for spraying fences, pipelines, small steel structural parts and other geometric shape complex, small surface area of the workpiece, it can easily and quickly spray paint to every place of the workpiece, can reduce paint overspray, save paint. The transfer efficiency of the coating is as high as 60-85%, and its atomization is very good, and the film thickness is uniform, which is conducive to the improvement of product quality