company news about The preparatory work of spraying equipment cannot be ignored

The preliminary work is so important, when anyone is doing anything, the preliminary preparation work is to spend a lot of time, but the preliminary work is ready, and a good foundation is made for the later things, then the work can be completed smoothly. So spraying equipment is the same, as long as the preliminary work preparation is complete, in the process of spraying, preparation will directly affect the quality of spraying, spraying equipment in the formal work before the following points to pay attention to:
1, to avoid electrostatic sparks, all airless spraying equipment should be well grounded.
2. The sprayed coating should be filtered first, and the filter should be selected according to the viscosity and particle size of the coating. If the filter is too fine, the paint is not easy to pass, and if it is too thick, the spray gun is easy to be blocked.
3, in order to reduce the possibility of pollution caused by the compressor, the air compressor should be as far away from the spraying site as possible.
4, the compressed air out of the air is filtered and then entered the spray equipment, which is conducive to extending the service life of the pneumatic system.
5, the outlet pipe and intake pipe should comply with the instructions in order to maintain sufficient air intake.
6, the capacity of the air compressor provided by the user should comply with the air consumption of the machine as specified in the manual, and should be greater than the consumption as far as possible.
Because spraying work, unlike other work can be reworked, once the color of the spray is determined, it can only continue. Therefore, we must pay great attention to the early work in order to be smooth in the subsequent work.