company news about Automatic spraying line equipment daily maintenance

1, daily inspection and maintenance 1, power distribution cabinet: check the power distribution cabinet indicators, buttons and instrument display should be intact, to be in normal working condition; There is no metal or all debris unrelated to the equipment in the distribution cabinet, check whether the line is damaged, various electrical components are set correctly, and the running state should be normal. 2, cleaning mechanism: check whether the pipeline leaks, the water cycle motor and pump have no difference, the motor surface temperature test, the top exhaust fan should work normally. 3. Curing drying equipment: Check whether the temperature control display of the electrical box of the equipment is normal, the circulating fan has no abnormal sound, the air motor is working normally, and the upper exhaust fan should work normally. 4, conveyor belt: check the motor oil pollution noise of the drive device, whether it works normally, temperature test, whether the triangle belt is worn: check the running state of the reducer, check the amount of gear oil, check the fit condition of the gear and the chain, there can be no accumulation chain phenomenon; Check the lubrication condition of the chain, if it is found that the chain is dry, it should be filled with high temperature lubricating oil in time. 5. Spraying device: check the lubrication of horizontal and vertical guide rails on both sides of the spray gun, check the pressure and radiator of the cold and dry machine, check the operation of the diaphragm pump, check the gas supply and oil pipe of the spray gun. Top of cabinet for air extraction air pressure test inspection. 1. Power distribution cabinet: clean power distribution cabinet regularly, tighten wiring terminals, check contactors, relays and other action contacts, repair defective products or replace new products. 2, body: regularly use a multimeter to test the insulation resistance of the motor three relative ground, eliminate the motor to the ground short circuit fault, so as to avoid danger; Check the current balance of the three-phase motor regularly with a clamp ammeter to avoid damage to the motor due to lack of phase; Check whether the pipeline is loose and tighten it in time; Pump body and conveyor are filled with butter to reduce wear. 3, conveyor belt: drive reducer regularly replace the gear oil, balance weight and tension mechanism adjustment, to ensure that the tension mechanism is flexible when the force; The chain is regularly added with high-temperature lubricating oil, so that the amount of oil is moderate and the chain is well lubricated. 4, spraying device: spraying mechanism guide dust cleaning, lubrication; Cold dryer heat sink clean dust; Gun disassembly, cleaning and maintenance. Check and maintain the air supply and exhaust fan, and clean the spray cabinet.